Basic Information

Octyl Decyl Alcohol Structure
IUPAC Name | Octan-1-ol / Decan-1-ol mixture |
CAS Number | 68603-15-6 |
HS Code | 2905.17 |
Molecular Formula | C8H18O / C10H22O |
Structural Formula | CH3(CH2)6CH2OH / CH3(CH2)8CH2OH |
Synonyms | C8-C10 fatty alcohol, Octyl decyl alcohol blend, C8/C10 alcohol mixture |
Molecular Weight | 130.23 / 158.28 g/mol |
Description
Octyl decyl alcohol is a blend of octyl alcohol (C8, 1-octanol) and decyl alcohol (C10, 1-decanol), representing medium-chain fatty alcohols derived from coconut or palm kernel oil fractionation.
This mixed fatty alcohol product is widely used as a feedstock for the production of short-chain anionic surfactants (C8–C10 SLS/SLES types), esters, and non-ionic surfactants (ethoxylates). Its medium-chain composition provides good solubility and wetting characteristics.
In cosmetics and personal care, C8–C10 fatty alcohols and their esters contribute to light skin feel and emollient properties.
Chemical and Physical Properties
Physical Description | Colorless to slightly yellowish liquid. |
Color / Form | Colorless to pale yellow. |
Odor | Mild, characteristic fatty odor. |
Taste | Mild, fatty. |
Boiling Point | 195–232 °C |
Melting Point | Below room temperature. |
Flash Point | ~80–100 °C |
Solubility | Slightly soluble in water; soluble in most organic solvents. |
Density | Approx. 0.823 g/cm³ |
Vapor Density | Greater than air. |
Vapor Pressure | Low at ambient temperature. |
Stability / Shelf Life | Stable under normal conditions. |
Viscosity | Low viscosity liquid. |
Heat of Combustion | Approx. −5,290 to −6,520 kJ/mol (weighted average for blend). |
Polymerization | No hazardous polymerization. |
Ionization Potential | No data available. |
Uses and Manufacturing
Uses
Octyl decyl alcohol (C8–C10 fatty alcohol blend) is used primarily as a feedstock for the production of short-chain anionic and non-ionic surfactants. Short-chain sodium octyl/decyl sulfate and sodium octyl/decyl ether sulfate (SLES with C8–C10 chain) are used in specialty low-irritation personal care formulations and as surfactants in agricultural adjuvants and industrial cleaners requiring rapid biodegradation.
Non-ionic surfactants (C8–C10 AEO, alcohol ethoxylates) produced from octyl decyl alcohol are used in wetting agents, emulsifiers, and detergent formulations where rapid wetting, low foam, and biodegradability are required. C8–C10 AEO with 5–8 EO units are effective non-ionic co-surfactants in hard surface cleaners and institutional cleaning products.
In the ester and plasticizer industry, octyl decyl alcohol is used to produce mixed C8–C10 esters of dicarboxylic acids (dioctyl/didecyl adipate, sebacate, phthalate alternatives) used as plasticizers for PVC and other polymers. These medium-chain esters offer good low-temperature flexibility and resistance to extraction compared to longer-chain esters.
Cosmetic applications include use as a light emollient in skin care formulations, particularly where a non-greasy, quick-absorbing texture is desired, and as a solvent for fragrance oils, UV filters, and color cosmetic pigments.
Industrial applications include use as a solvent in specialty coatings and inks, a hydraulic fluid additive, and as a process chemical in textile wet processing.
Methods of Manufacturing
Octyl decyl alcohol is produced by hydrogenation of C8–C10 fatty acid fractions (or methyl ester fractions) derived from fractionation of coconut oil or palm kernel oil fatty acids. The mixed acid blend is hydrogenated using copper chromite or copper-zinc catalyst under high-pressure hydrogen.
The C8/C10 ratio is controlled by blending appropriate amounts of C8 and C10 fatty acid/ester fractions before hydrogenation, or by blending separately produced C8 and C10 fatty alcohols to the desired specification.
Quality is characterized by hydroxyl value, GC composition (C8:C10 ratio), acid value, iodine value, moisture, and color (APHA).
Hazard Identification
Hazard Summary
Low to moderate toxicity. May cause skin and eye irritation.
Fire Hazard
Combustible liquid.
Skin, Eye & Respiratory Irritations
Mild skin and eye irritant.
Safety and First Aid
Physical Dangers
Combustible liquid.
Skin First Aid
Wash with soap and water.
Eye First Aid
Flush with water for 15 minutes.
Ingestion First Aid
Seek medical advice.
Fire Fighting Procedures
Use CO₂, foam, or dry chemical.
Handling and Storage
Nonfire Spill Response
Small spill: Absorb with inert absorbent. Collect in labeled containers. Ventilate area. Prevent entry into drains.
Large spill: Contain with bunds. Eliminate nearby ignition sources (flash point ~80–100 °C). Pump into recovery containers. Do not allow entry into waterways. Report spill to environmental authorities.
Safe Storage
Store in original, tightly closed containers in a cool, dry, well-ventilated area. Keep away from heat, ignition sources, and strong oxidizing agents. Ground containers during transfer. Maintain good ventilation in storage area.
Storage Conditions
Recommended storage temperature: 15–30 °C. Shelf life: 24 months in original sealed containers. Suitable containers: stainless steel 304/316, HDPE, or carbon steel. Nitrogen blanket for bulk storage. Protect from moisture and oxidizing agents.

