Basic Information

Palm Acid Oil Structure
Product Type | Byproduct from Physical Refining of Crude Palm Oil |
CAS Number | 68956-81-0 |
HS Code | 1522.00 |
Origin | Elaeis guineensis (recovered during CPO refining) |
Main Components | Free fatty acids (C16, C18:1), mono/diglycerides, squalene, sterols, tocopherols |
Synonyms | PAO, Palm Fatty Acid Distillate (PFAD), Crude palm fatty acid, Acid oil |
Grade | Industrial / Feed Grade |
Description
Palm acid oil (PAO) is a byproduct recovered during the physical refining of crude palm oil. During the deacidification step (steam stripping/deodorization), the free fatty acids (FFA) and other volatile components are removed and condensed to yield a crude fraction known as palm fatty acid distillate (PFAD) or palm acid oil.
PAO typically contains a mixture of free fatty acids (predominantly palmitic and oleic acids), mono- and diglycerides, squalene, sterols, and tocopherols depending on the refining process used.
Due to its high FFA content, PAO serves as an economical feedstock for soap manufacturing, biodiesel production, animal feed supplementation, and oleochemical processing. It is not suitable for direct food applications without further refining.
Technical Specifications
Appearance | Dark brownish-yellow semi-solid to liquid fat |
Odor | Strong, characteristic rancid fatty odor |
Free Fatty Acid (FFA as palmitic) | Typically 60–90% |
Moisture & Impurities | Max. 1.0% |
Unsaponifiable Matter | Typically 2–10% (includes sterols, squalene, tocopherols) |
Iodine Value | Approx. 40–55 g I₂/100g |
Saponification Value | 190–200 mg KOH/g |
Slip Melting Point | 30–38 °C |
Density (liquid) | Approx. 0.89 g/cm³ |
Color | Dark yellow to brown |
Tocopherols | Typically 600–1000 ppm (α, γ, δ mixed tocopherols) |
Squalene | Typically 0.2–0.5% |
Flash Point | >200 °C |
Uses and Manufacturing
Uses
Palm acid oil (PFAD) is an economically important byproduct of palm oil refining with multiple applications. Despite its low cost relative to refined palm oil, it contains valuable components including free fatty acids (particularly palmitic and oleic acid), vitamin E (tocopherols), squalene, and phytosterols.
The primary industrial use of PAO is as a low-cost feedstock for soap manufacturing. The high FFA content (60–90%) makes it directly usable for acid-catalyzed (pre-esterification) biodiesel production, which is the preferred route when processing high-FFA feedstocks because base-catalyzed transesterification would produce excessive soap. PAO-derived biodiesel (FAME) meets standard biodiesel specifications after acid esterification followed by base transesterification.
In animal nutrition, PAO is used as a high-energy fat supplement in poultry and ruminant diets. Its energy density (approximately 8,500 kcal/kg metabolizable energy for poultry) and high palmitic acid content make it a valuable fat source in broiler, layer, and ruminant feed formulations. It is typically added at 1–5% of feed weight.
PAO is also used in the rubber industry as a processing aid and peptizing agent for natural rubber, contributing to reduced viscosity and improved processing characteristics of rubber compounds. In the oleochemical industry, PAO serves as a starting material for production of palm-based fatty acids, fatty acid methyl esters, and metallic soaps.
The tocopherols and squalene present in PFAD can be recovered by molecular distillation as valuable by-products for nutraceutical and cosmetic applications.
Methods of Manufacturing
Palm acid oil is produced as a byproduct during physical refining of crude palm oil (CPO). In the physical refining process, CPO is first degummed (phosphoric acid treatment to remove phospholipids), bleached (activated earth treatment to remove carotenoids and oxidation products), and then deacidified and deodorized simultaneously in a single stripping step.
During the deacidification/deodorization step, steam is injected at high temperature (240–270 °C) and very low pressure (2–5 mbar) to strip out free fatty acids and volatile flavor/odor compounds. The condensed vapors, collected at a lower temperature in the distillate receiver, constitute the PFAD/PAO. The yield is typically 4–6% of CPO weight, depending on the initial FFA content of the CPO.
The composition of PAO varies with CPO quality. Higher FFA CPO produces a higher yield of PAO with different minor component concentrations. PAO is typically handled in bulk, with quality characterized by FFA content, moisture, unsaponifiable matter, tocopherol content, and color.
Hazard Identification
Hazard Summary
Low acute toxicity. High FFA content may cause mild skin irritation. Handle with care to avoid hot liquid burns.
Fire Hazard
Combustible fat.
Skin, Eye & Respiratory Irritations
Mild skin irritant. Strong odor may cause respiratory discomfort.
Safety and First Aid
Physical Dangers
Combustible fat. Hot PAO may cause thermal burns.
Skin First Aid
Wash with soap and water. Treat hot burns with cool running water.
Eye First Aid
Flush with water for 15 minutes.
Ingestion First Aid
Not intended for human consumption. Seek medical advice.
Fire Fighting Procedures
Use CO₂, foam, or dry chemical. Do not use water jet on burning fat.
Handling and Storage
Nonfire Spill Response
Small spill: Absorb with dry sand or inert oil absorbent. Collect in labeled waste containers. Warn of slip hazard. Do not allow large quantities into waterways.
Large spill: Contain with bunds. Pump into recovery containers. Beware of hot product burns if product is heated. Report to environmental authorities if waterways are at risk. Dispose of spilled material in accordance with local regulations.
Safe Storage
Store in carbon steel or stainless steel tanks with heating coils (product solidifies below 30–35 °C). Maintain temperature at 40–50 °C for liquid handling. Protect from moisture. Use nitrogen blanket to minimize oxidation. Keep away from food products and animal feed during storage. Avoid contact with copper and its alloys which catalyze oxidative deterioration.
Storage Conditions
Recommended storage temperature: 40–50 °C (liquid). Shelf life: 6–12 months; FFA content may increase with time — periodic quality checks recommended. Suitable containers: heated carbon steel tanks, stainless steel 304/316 tanks, or HDPE (for small quantities, at room temp if semi-solid). Nitrogen blanket recommended to reduce oxidation. Monitor FFA, peroxide value, and color at regular intervals.

