Basic Information

Palm Kernel Diethanolamide Structure
IUPAC Name | N,N-bis(2-hydroxyethyl)dodecanamide (predominant component) |
CAS Number | 68603-42-9 |
HS Code | 3402.13 |
Molecular Formula | C16H33NO3 (for lauric DEA, major component) |
Structural Formula | RCO-N(CH2CH2OH)2 (R = predominantly C12 from palm kernel) |
Synonyms | PKO DEA, Palm kernel oil diethanolamide, Cocamide DEA (palm kernel-based), PKDEA |
Molecular Weight | 287.44 g/mol (for lauric DEA) |
Description
Palm kernel diethanolamide (PKO DEA) is a non-ionic surfactant and foam booster produced by the reaction of palm kernel oil-derived fatty acids (predominantly lauric and myristic acids) with diethanolamine (DEA).
It is widely used in personal care and household cleaning products as a secondary surfactant, foam stabilizer, and viscosity builder. PKO DEA enhances the foam quality of anionic surfactant systems and provides a thickening effect in shampoos, body washes, and liquid soaps.
Like other alkanolamides, it exhibits mild conditioning and emulsifying properties. Formulation care is needed to minimize free DEA content in finished personal care products.
Chemical and Physical Properties
Physical Description | Clear to slightly yellowish viscous liquid. |
Color / Form | Clear to pale yellow. |
Odor | Mild, characteristic amide odor. |
Taste | Not applicable. |
Boiling Point | Not determined (decomposes before boiling). |
Melting Point | Liquid at room temperature. |
Flash Point | >100 °C |
Solubility | Dispersible in water; soluble in polar organic solvents. |
Density | Approx. 0.99–1.02 g/cm³ |
Vapor Density | Greater than air. |
Vapor Pressure | Very low at ambient temperature. |
Stability / Shelf Life | Stable at neutral to slightly alkaline pH. May hydrolyze under strongly acidic or alkaline conditions. |
Viscosity | Viscous liquid. |
Heat of Combustion | Not applicable (aqueous blend). |
Polymerization | No hazardous polymerization. |
Ionization Potential | No data available. |
Uses and Manufacturing
Uses
Palm kernel diethanolamide (PKO DEA) is a multifunctional secondary surfactant that serves as a foam booster, thickener, and co-emulsifier in personal care and cleaning product formulations. In shampoos, it is used at 1–5% to boost and stabilize the foam generated by primary anionic surfactants (SLES, sodium lauryl sulfate, cocoamphoacetate), while simultaneously contributing to formulation viscosity, eliminating the need for additional electrolyte thickeners.
In liquid soaps and body washes, PKO DEA provides rich, creamy foam and a mild conditioning feel on skin. In shampoo formulations for oily hair, it contributes degreasing and deep-cleansing action due to the nitrogen atom in its molecular structure, which enhances surfactant power.
In household cleaning products (dishwashing liquids, multi-purpose cleaners), PKO DEA improves foam quality and stability, particularly in the presence of grease and food soils. It enhances the grease-cutting ability of the formulation and helps maintain foam volume during dishwashing.
In industrial cleaning applications, PKO DEA is used in metal cleaning compounds, emulsifiable solvent cleaners, and emulsifying agents for oil-water separation. It provides good emulsification of mineral oils and is a component of metalworking fluid emulsifiers.
In the textile industry, PKO DEA is used as a softening and antistatic agent in fabric finishing. In agricultural formulations, it serves as an emulsifier and spreading agent in herbicide and insecticide preparations.
Methods of Manufacturing
PKO DEA is produced by the condensation (amidation) reaction of palm kernel oil fatty acids (predominantly C12 lauric acid and C14 myristic acid) or their methyl esters with diethanolamine (DEA) in a molar ratio of approximately 1:1 to 1:2 (fatty acid:DEA) at temperatures of 140–180 °C.
The reaction produces a mixture of fatty acid diethanolamide (the desired product), fatty acid monoethanolamide, unreacted DEA, and minor amounts of esteramide byproducts. The product distribution depends on the reaction stoichiometry and temperature.
The reaction is typically carried out in a continuous stirred reactor or batch reactor under nitrogen atmosphere to prevent color degradation. The product is characterized by active matter content (gravimetric), free DEA content (titration), color (APHA), pH (10% solution), moisture, and viscosity. Free DEA content is particularly important for personal care applications, where it is controlled to minimize nitrosamine formation risk.
Hazard Identification
Hazard Summary
Mild skin and eye irritant. May cause sensitization in susceptible individuals. Nitrosamine formation concern at high free DEA.
Fire Hazard
Combustible liquid at elevated temperatures.
Skin, Eye & Respiratory Irritations
May cause skin and eye irritation on direct contact.
Safety and First Aid
Physical Dangers
Combustible liquid at elevated temperature.
Skin First Aid
Wash with soap and water thoroughly.
Eye First Aid
Flush with water for 15 minutes. Seek medical attention.
Ingestion First Aid
Do not induce vomiting. Seek medical attention immediately.
Fire Fighting Procedures
Use water spray, CO₂, foam, or dry chemical.
Handling and Storage
Nonfire Spill Response
Small spill: Absorb with inert absorbent material. Collect in labeled, sealed containers. Rinse area with water. Prevent entry into drains (surfactant causes foaming in waterways).
Large spill: Contain with bunds. Do not allow entry into waterways — CAPB causes significant aquatic BOD. Recover liquid by pumping into sealed containers. Notify environmental authorities if significant aquatic risk. Clean residual from surfaces with water.
Safe Storage
Store in original, tightly closed containers in a cool, dry, well-ventilated area. Do not store in galvanized or unlined carbon steel containers — use HDPE or stainless steel. Protect from frost (freezing may cause phase separation) and elevated temperatures (>40 °C). Keep away from strong acids and strong bases (may cause hydrolysis). Avoid storage near food products.
Storage Conditions
Recommended storage temperature: 15–35 °C. Do not allow to freeze. Shelf life: 12 months in original sealed containers at recommended temperature. Suitable containers: HDPE, stainless steel 304/316. Avoid galvanized iron, copper, and zinc. Protect from direct sunlight. Agitate or recirculate before use if storage has been prolonged, to ensure homogeneity.

