Basic Information

Palm Kernel Fatty Acid Distillate Structure
Product Type | Byproduct from Physical Refining of Crude Palm Kernel Oil |
CAS Number | 91078-92-1 |
HS Code | 3823.11 |
Origin | Elaeis guineensis kernel oil (recovered during CPKO refining) |
Main Fatty Acids | Lauric (C12:0): 40–55%; Myristic (C14:0): 14–20%; Caprylic (C8:0): 3–6% |
Synonyms | PKFAD, Palm kernel distillate, Palm kernel acid oil, Palm kernel fatty acids |
Grade | Industrial / Feed Grade |
Description
Palm kernel fatty acid distillate (PKFAD) is a byproduct obtained during the physical refining of crude palm kernel oil. It contains primarily free fatty acids including lauric (C12), myristic (C14), caprylic (C8), capric (C10), and oleic (C18:1) acids, along with minor amounts of partial glycerides and sterols.
PKFAD is an economical source of lauric-type fatty acids and is used as a feedstock for soap manufacturing, animal nutrition, and oleochemical processing. Its high lauric acid content makes it particularly valuable for producing soaps with good lathering and cleansing properties.
In animal nutrition, PKFAD is used as an energy supplement in ruminant and poultry diets due to its high energy density and medium-chain fatty acid content.
Chemical and Physical Properties
Appearance | Dark yellowish to brownish liquid or semi-solid |
Odor | Strong, characteristic fatty/rancid odor |
Free Fatty Acid (FFA as lauric) | Typically 70–90% |
Moisture & Impurities | Max. 1.0% |
Unsaponifiable Matter | Typically 0.5–2.0% |
Iodine Value | Approx. 15–25 g I₂/100g (predominantly saturated) |
Saponification Value | 200–225 mg KOH/g |
Slip Melting Point | 20–30 °C |
Density (liquid) | Approx. 0.87 g/cm³ |
Color | Yellow to brown |
Fatty Acid Profile (typical) | C8: 3–5%, C10: 3–5%, C12: 40–55%, C14: 14–20%, C16: 7–10%, C18:1: 12–18% |
Flash Point | >150 °C |
Uses and Manufacturing
Uses
Palm kernel fatty acid distillate (PKFAD) is a valuable low-cost industrial raw material primarily used in soap manufacturing, animal nutrition, biodiesel production, and oleochemical processing.
In soap manufacturing, PKFAD provides an economical alternative to refined palm kernel fatty acids. Its high lauric acid content (40–55%) contributes excellent lathering and cleansing properties to laundry soaps and industrial cleaning bars. PKFAD-based soaps are used widely in institutional and industrial laundry, dishwashing bars, and low-cost personal wash products in developing markets.
In animal nutrition, PKFAD is extensively used as a high-energy fat supplement (approximately 8,700 kcal/kg gross energy) in broiler, layer, and swine diets, and particularly in dairy cattle and ruminant rations where medium-chain fatty acids have additional health benefits including antimicrobial activity against gut pathogens and rumen bypass characteristics. Typical inclusion rates in poultry feed are 2–4%.
Biodiesel production: PKFAD undergoes acid-catalyzed esterification with methanol (to reduce FFA below 1%) followed by base-catalyzed transesterification to produce palm kernel oil-derived FAME. This biodiesel has excellent cold flow properties due to its high content of medium-chain methyl esters (C8–C14).
In oleochemical processing, PKFAD serves as a feedstock for distilled fatty acids via vacuum distillation, metallic soaps (zinc, calcium, aluminum laurate for PVC stabilization and lubricants), and other lauric acid derivatives.
Methods of Manufacturing
PKFAD is produced as a byproduct of the physical refining of crude palm kernel oil (CPKO). During the deacidification/deodorization step of CPKO refining, steam is injected at 230–260 °C and very low pressure (2–5 mbar) to strip the free fatty acids and volatile compounds from the oil.
The condensed vapors and fatty acid-rich distillate collected in the distillate receiver constitute PKFAD. The yield varies between 3–8% of CPKO weight depending on the initial FFA content of CPKO and the refining conditions.
PKFAD is handled in bulk in heated tanks (maintained at 40–50 °C to keep it fluid) due to its relatively high melting point from the high lauric/myristic content. Quality is characterized by FFA content (titration), moisture, iodine value, saponification value, and GC fatty acid profile.
Hazard Identification
Hazard Summary
Low acute toxicity. High FFA content and low pH may cause skin irritation. Beware of hot burns during processing.
Fire Hazard
Combustible.
Skin, Eye & Respiratory Irritations
May cause skin and eye irritation due to high FFA content.
Safety and First Aid
Physical Dangers
Combustible liquid/semi-solid. Hot material may cause thermal burns.
Skin First Aid
Wash with soap and water.
Eye First Aid
Flush with water for 15 minutes.
Ingestion First Aid
Not intended for human consumption. Seek medical advice.
Fire Fighting Procedures
Use CO₂, foam, or dry chemical.
Handling and Storage
Nonfire Spill Response
Small spill: Absorb with sand or inert oil absorbent. Collect in labeled containers. Warn of slip hazard. Prevent entry into drains and waterways.
Large spill: Contain with bunds. Pump into recovery containers. Beware of burns if product is in heated liquid form. Report to environmental authorities if waterways are at risk. Dispose according to local regulations for fatty waste.
Safe Storage
Store in heated carbon steel or stainless steel tanks (product tends to solidify below 20–25 °C). Maintain at 35–45 °C for liquid handling. Protect from moisture and oxidation. Nitrogen blanket recommended for long-term storage. Keep separate from food products and feed materials.
Storage Conditions
Recommended storage temperature: 35–45 °C (liquid). Shelf life: 6–12 months. FFA content and color may increase over time — conduct regular quality monitoring (FFA, color, peroxide value). Suitable containers: heated mild steel or stainless steel tanks. Nitrogen blanket recommended. Avoid copper, brass, and galvanized surfaces.

